
You have a lot, or a few of them, and the numbers say small multifamily makes more sense than another single-family spec home. Now the real question: duplex or townhomes? And how do you design something you can build five, ten or twenty times without reinventing it on every lot?
The answer starts with your exit, not the floor plan.
Start With How You Will Make Your Money
Holding and renting? A duplex keeps two units under one roof and usually on one lot, which keeps ownership simple. You manage one building, one roof and one yard.
Building to sell? Townhomes can often be sold one at a time, depending on how the lots are platted and what your city allows. That can mean faster returns on each unit.
Not sure yet? Design for flexibility. A plan that works as a rental and appeals to buyers gives you options if the market shifts.
Zoning, platting and fire separation rules decide what is allowed on your site. Check with your city's planning department before you commit to either one.
What Renters and Buyers Pay For
Whichever you build, the same features drive rent and resale in Texas markets:
- A bedroom and bathroom for nearly everyone. In college towns like Bryan-College Station, units with a private bath for each bedroom are easier to lease to roommates.
- Laundry inside the unit. Not shared, not in the garage if you can help it.
- Covered outdoor space. A porch or patio extends a modest floor plan.
- Storage and parking. A garage or at least a defined spot, plus closet space that holds real life.
- Privacy between units. Stacked closets and stairs along the shared wall help with sound.
Five Rules for a Repeatable Floor Plan
The best investment plans get cheaper and faster to build each time. Here is what makes that possible:
- Mirror the units. Two identical units, flipped along the shared wall, put plumbing back to back and simplify framing.
- Stack wet areas. Kitchens, baths and laundry grouped together and stacked floor to floor cut plumbing runs.
- Keep the footprint simple. A clean rectangle with a straightforward roof is faster to frame, cheaper to roof and less likely to leak.
- Use standard dimensions. Walls and openings that respect standard material sizes reduce waste on every unit.
- Lock in finishes. A standard finish package means faster ordering and fewer decisions on every build.
Once a plan is dialed in, your crews learn it. The second build goes faster than the first, and by the fifth they could do it in their sleep.
An Example: Plan No. 8001

Our build-ready Plan No. 8001 is a contemporary duplex with two identical units. Each unit has 5 bedrooms, 5.5 baths and 2,166 square feet over two stories, with a 1-car garage, a mudroom and covered porches. That adds up to 10 bedrooms and 4,332 square feet under one roof. It is designed with student housing, short-term rentals and multifamily income in mind. The build-ready plan is $3,750.

It shows the principles above in action: identical units, a private bath for nearly every bedroom, and in-unit amenities renters look for.
When to Go Custom Instead
A build-ready duplex is a great start, but many developers need a design fitted to their land and their market: a specific lot width, a townhome row of four or six units, a neighborhood of matching homes, or a unit mix tuned to local rents.
That is where our Developer and Builder design package comes in. We design small-scale multifamily and neighborhood developments with constructability and cost in mind. The process is built around your schedule, and on average it runs about 30 business days from the kickoff meeting to completed construction drawings, depending on how quickly you review submissions. Texas projects are stamped by our licensed architect.
When you are ready to build the same design on another lot, the Rebuild Package provides an additional license and a new site plan.
Bring Us Your Lot and Your Numbers
Book a free 30-minute consultation. Bring your site, your target rents or sale prices, and how many units you are planning. We will talk through duplex versus townhomes and what a repeatable plan could look like for your project.
Book a free developer and builder design consultation
Want to see more investment designs first? Visit our Developers and Builders page.
Frequently Asked Questions
What is the difference between a duplex and a townhome?
A duplex is two units in one building, usually on one lot. Townhomes are attached homes that can often be platted and sold individually, depending on local rules.
Is a duplex a good investment in Texas?
It can be, especially in rental markets like college towns. Results depend on your land cost, build cost and local rents.
How do you make a floor plan cheaper to build repeatedly?
Mirror the units, stack plumbing, keep the footprint and roof simple, use standard dimensions and lock in a finish package.
Can I build the same plan on multiple lots?
Yes. The Texas House Plans Rebuild Package provides an additional license and a new site plan for each new lot.
Do you design townhome communities?
Yes. Texas House Plans designs duplexes, townhomes and neighborhood developments for developers and builders.
How long does developer design take?
On average, about 30 business days from kickoff to completed construction drawings, depending on review time.
0 comments